SANTEST CO.,LTD.

List with applicationsList with models

Model GY Series

GYSE-S Probe
SSI output (detachable probe element)
GYSE-S Probe

SSI output with 24 bits. Min.1μm / bit.

Specifications

Non-linearity≦±0.025%FS TYP
Resolution0.1mm-0.001mm
Repeatability≦±0.001%FS (Min. ±3μm)
Temp. drift≦±15ppmFS/°C
Position(STD)SSI (Synchronized Serial Interface) , 24bit, Binary(STD) or Gray
Velocity (Option)not available
AlarmOpen drain 50V 0.1A (for lost magnet)
Power supply+24(±2)VDC (70mA)
Sampling freq.Std 1kHz (up to stroke 1000mm)
Max. Pressure35MPa (probe rod)
Operating temp.-20°C-+75°C
Storage temp.-40°C-+75°C
Vibration15G (20-100Hz)
Shock100G (2msec)
IP gradeIP67

・The above mentioned accuracy applies to sensors with an
effective stroke of 300 mm or more.

Model No.

①Effective stroke
  15-7500mm

②Thread dead zone
  S:50mm(STD)
  □:□mm(option)(specified by customers)

③Tip dead zone
  S:70mm/90mm/100mm(STD)
  ・S (STD length) depends on the selected magnet or float in ⑤.

tip DZmagnetfloat
70mmM2PN,M0SM,M0LM,M3,M11NF25N,F28N  
90mmF28S,F30S
100mmT144,T163F40S,F42S,F50S
□:□mm(option)(specified by customers)

④Thread/Rod diameter
  M :M24xP1.0, rod Φ10(STD)
  N :M18xP1.5, rod Φ10
  U :3/4-16UNF-3A, rod Φ10
  M8 :M24xP1.0, rod Φ8
  N8 :M18xP1.5, rod Φ8
  U8 :3/4-16UNF-3A, rod Φ8
  M14:M24xP1.0, rod Φ13.8
  ZZ:EF (flexible element) only (without outer housing)

⑤Associated magnet or float

magnetloat
M2PN :No.2PN (STD)
M0SM :No.ΦSPM
M0LM :No.ΦLPM
M3 :No.3
M11N :No.11N
T144 :No.T14-M4
T163 :No.T16-M3
MG□ :other magnet
F28S :Φ28 SS316
F30S :Φ30 SS316L
F40S :Φ40 SS316(B)
F42S :Φ42.5 SS316
F50S :Φ50 SS316
F54S :Φ54 SS304
F25N :RF-A10 plastic
F28N :RF-A6 plastic
FL□ :other float

⑥Cable connection
  CN:connector(STD)
  △G□F:pigtail / cable end : free
  △G□A:pigtail / cable end : with connector for relay
    (□:cable length(m))
    (△:cable type
       S:standard, H:high temp. cable, R:robot cable)

⑦Resolution
  D2:0.1mm
  D3:0.05mm
  D4:0.01mm(STD)
  D5:0.005mm
  D7:0.002mm
  D8:0.001mm

⑧Direction
  D:When magnet moves toward tip, output increase
  R:When magnet moves toward tip, output decrease

⑨Output code
  B:Binary(STD)
  G:Gray

⑩Option (see page 74)
  blank:without option
  SRT:SRT option

Dimensions

Probe Connection Connector type Pigtail type
Zoom ZoomZoomZoom

・materials ; Probe head : Al alloy, Probe rod : SS304
・magnet (float) ; Select one from group GG on page 75 or from floats on page 76.
・The tip dead zone length depends on the selected magnet or float.
・connector ; straight or L-sharped (housing parts : BS with Ni plating)
・Connector-cable assembly is done at SANTEST, since special tool is required.

  • Catalogue
  • Manuals
Pagetop

Contact Form

Pagetop