SANTEST CO.,LTD.

List with applicationsList with models

Model GY Series

GYcRP Probe
High performance probe
GYcRP Probe

Between probe and controller, RS422 differential line driver transmission is used, whose advantage is robust against electrical noise. In combination with GYDC-05 controller, Min. 1μm resolution is possible. SRT option and Probe rod 200°C option are available.

Specifications

Non-linearity≦±0.05%FS TYP
Resolution(analogue)≦0.01%FS(with GYHC)
(digital)0.1mm(with GYDC-05)
Repeatability≦±0.01%FS
Temp. drift≦±50ppmFS/°C
Max. Pressure35MPa(probe rod)
Operating temp.-20°C-+80°C
Storage temp.-40°C-+80°C
Vibration6G(40Hz 2mmPP)
Shock100G(2msec)
IP gradeIP67
CableStd 1.5m(Option Max.200m)

・The above mentioned accuracy applies to sensors with an
effective stroke of 300 mm or more.

◆associated controler
 analogue output:GYHC(Page.42-43), GYFC2
 digital output:GYDC-05(Page.46-47)
 MelsecQ built-in:DC-Q(JCC)(Page.48)
 CC-Link:WAGO I/Osystem750-635(Page.49)

Model No.

①Effective stroke
  15mm-5200mm

②Thread dead zone
  S:50mm(STD)
  □:□mm(option)(specified by customers)

③Tip dead zone
  S:70mm/90mm/100mm(STD)
  ・S (STD length) depends on the selected magnet or float in ⑤.

tip DZmagnetfloat
70mmM2P,MG0,M11F25N,F28N
90mmF28S,F30S
100mmT142,T162F40S,F42S,F50S
□:□mm(option)(specified by customers)

④Thread/Rod diameter
  M :M24xP1.0, rod Φ10(STD)
  N :M18xP1.5、, rod Φ10
  U :3/4-16UNF-3A, rod Φ10
  M8 :M24xP1.0, rod Φ8
  N8 :M18xP1.5, rod Φ8
  U8 :3/4-16UNF-3A, rod Φ8
  M14:M24xP1.0, rod Φ13.8

⑤Associated magnet or float

magnetfloat
M2P :No.2P (STD)
MG0 :No.Φ
M11 :No.11
T142 :No.T14-M2
T162 :No.T16-M2
MG□ :other magnet
F28S :Φ28 SS316
F30S :Φ30 SS316L
F42S :Φ42.5 SS316
F40S :Φ40 SS316(B)
F54S :Φ54 SS304
F50S :Φ50 SS316
F28N :RF-A6 plastic
F25N :RF-A10 plastic
FL□ :other float

⑥Cable connection
  CN:connector(STD)
  △G□F:pigtail / cable end : free
  △G□A:pigtail / cable end : with connector for relay
  △G□FC:pigtail / cable end : with connector for GYFC2/3
  □:cable length(m))
  △:cable type
  S:standard, H:high temp. cable, R:robot cable)
  <Water proof option>
  WPCN:submersible connector type
  WP3G□F:pigtail / cable end : free
  WP3G□A:pigtail / cable end : with connector for relay
  WP3G□FC:pigtail / cable end : with connector for GYFC2/3
  □:cable length(m))
  ・P73 shows the detailed information

⑦Output
  00: depends on external controller

⑧Option(see page 72-74)
  blank:without option
  SRT:SRT option
  H0:probe rod 100°C
  H1:probe rod 120°C
  H2:probe rod 200°C

Dimensions

Probe Pigtail type(Option) Connection 
Zoom ZoomZoom
  • Catalogue
Pagetop

Contact Form

Pagetop