SANTEST CO.,LTD.

List with applicationsList with models

Model GY Series

GYcAT4
Analogue output (replacement model for GYLT, GYLS)
GYcAT4

Replacement model for GYLS (0-10V output), GYLT(4-20mA output).
Linearity : ≦±0.05%FS.
current consmption is 100mA.

Specifications

Non-linearity≦±0.05%FS TYP
Resolution≦0.01%FS
Repeatability≦±0.01%FS
Temp. drift≦±40ppmFS/°C
Voltage output0-10V or 10-0V
(output current:Max.5mA, load:Min.2kΩ)
Current output4-20m or 20-4mA
(load:Max.500Ω)
Alarm outputnot available
Power supply+24(±2)VDC (100mA)
Sampling freq.Std 1kHz (up to stroke 1000mm)
Msx. Pressure35MPa (probe rod)
Operating temp.-20°C-+80°C
Storage temp.-40°C-+80°C
Vibration6G (or 40Hz 2mmPP)
Shock50G (2msec)
IP gradeIP67 (10kPa, 30min)

・The above mentioned accuracy applies to sensors with an
effective stroke of 300 mm or more.

Model No.

①Effective stroke
  15-3500mm

②Thread dead zone
  S:50mm (STD)
  □:□mm (option) (specified by customers)

③Tip dead zone
  S:70mm/90mm/100mm (STD)
・S (STD length) depends on the selected magnet or float in ⑤.

tip DZmagnetfloat
70mmM2P,M2PN,MG0,M0SM,M0LM,M11,M11N,M3F25N,F28N 
90mmF28S,F30S
100mmT142(144), T162(163)F40S, F42S, F50S

□:□mm(option)(specified by customers)

④Thread/Rod diameter
  M :M24xP1.0, rod Φ10 (STD)
  N :M18xP1.5, rod Φ10
  U :3/4-16UNF-3A, rod Φ10
  M8 :M24xP1.0, rod Φ8
  N8 :M18xP1.5, rod Φ8
  U8 :3/4-16UNF-3A, rod Φ8
  M14:M24xP1.0, rod Φ13.8

⑤Associated magnet or float

<magnet><float>
M2P:No.2P (STD)
M2PN:No.2PN
MG0:No.Φ
M0SM:No.ΦSPM
M0LM:No.ΦLPM
M3:No.3
M11:No.11
M11N:No.11N
T142:No.T14-M2
T144:No.T14-M4
T162:No.T16-M2
T163:No.T16-M3
MG□:other magnet
F28S:Φ28 SS316
F30S:Φ30 SS316L
F40S:Φ40 SS316(B)
F42S:Φ42.5 SS316
F50S:Φ50 SS316
F54S:Φ54 SS304
F25N:RF-A10 plastic
F28N:RF-A6 plastic
FL□:other float

⑥Cable connection
  CN:connector(STD)
  G□F:pigtail / cable end : free
  G□A:pigtail / cable end : with connector for relay
    (□:cable length (m))

⑦Position output
  AD:0-10V (When magnet moves toward tip, output increase)
  AR:10-0V (When magnet moves toward tip, output decrease)
  BD:4-20mA (When magnet moves toward tip, output increase)
  BR:20-4mA (When magnet moves toward tip, output decrease)
  CD□□:bipolar output (-□V-+□V)
        (for example CD10:-10V-+10V)
  CR□□:bipolar output(+□V--□V)
        (for example CR05:+5V--5V)

⑧Option (see page 72-74)
  blank:without option
  H0:probe rod 100°C

Dimensions

probe Pigtail type (Option)  
Zoom ZoomZoom

・Material probe head:Al diecast, probe rod:SS304
・Standard magne:No.2PN. Other magnets are available from Magnet Grouping「B」(P.75).
・The tip dead zone length depends on the selected magnet or float type.
・The length of the cable should be less than 10m in case of using the voltage output type
and 100m in case of using the current output type.
・Connector:Omron XS2C-D4S1 (straight type) or D4S2 (L type) (Material:PBT plastic)
・Applied cable diameter:Φ5-Φ6
・Wire size:0.18-0.75mm2

  • Catalogue
Pagetop

Contact Form

Pagetop