SANTEST CO.,LTD.

List with applicationsList with models

Explosion-proof Type

EX-GYdT-A Probe.
Compact, flameproof enclosure
Analogue output
EX-GYdT-A Probe.

EX-GYdT-A probe is a level or displacement transducer of the
flameproof enclosure type which has GYcAT circuit inside.
Having the closed structure for sensor head achieves waterproof
performance and compact.
An explosion protection symbol is Exd II CT6, and you can use it in
the most of the explosive gas atmosphere.
Form official approval pass symbol :
No. TC16475 (rod diameter Φ10),
No. TC16474 (rod diameter Φ13.8)

・ Noise cancellation


( Created on Feb. 7. 2023 )

Specifications

Non-linearity≦0.05%FS Tpy.
Resolution≦0.01%FS
Repeatability≦±0.01%FS
Temp. drift≦±40ppmFS / °C
Voltage output0〜10V or 10〜0V
(output current : Max.5mA, load : Min.2kΩ)
Current output4〜20mA or 20〜4mA
(load : Max.500Ω)
Alarm Open collector 30V 0.1A
Power supply+24(±2)VDC (50mA)
Sampling freq.Std. 1kHz (Total rod length : 1300mm)
Max. Pressure35MPa (probe rod)
Operating temp.-20°C〜+80°C
Storage temp.-40°C〜+80°C
Vibration6G (or 40Hz 2mmPP)
Shock50G (2msec)
IP gradeIP67 (Std.), IP68 (option)
Explosion
-proof symbol		ExdⅡ CT6

　・The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
　・The specification of stroke less than 300mm is equal that of stroke 300mm.

Model No.

① Rod diameter
　　10 :Φ10
　　14 :Φ13.8


② Total rod length
　　□ :□mm
　　(Total rod length = head dead zone + effective stroke + tip dead zone)


③ Effective stroke
　　15mm〜3500mm


④ Head dead zone
　　50 :50mm(Std.)
　　□ :□mm (option)(specified by customers)
　　　・Possible Min. length depends on the selected magnet or float.


⑤ Tip dead zone
　　S :70mm/100mm(Std.)

tip DZmagnetfloat
70mmBF 
100mmT142,T162F40S,F42S,F50S,F54S

　　□ :□mm(option)(specified by customers)
　　　・Possible Min. length depends on the selected magnet or float


⑥ Associated magnet or float

magnetfloat
T142 :No.T14-M2
T162 :No.T16-M2
BF : No.2SI3-I4		F40S :Φ40 SS316(B)
F42S :Φ43 SS316L
F50S :Φ50 SS316L
F54S :Φ54 SS304

　　・Selecting magnet from page 116-118(B)．
　　・Please consult our factory in case of requesting special magnet or float.
　　・This model code means only specifying associated magnet or float.
　　・Ordering magnet or float individually.


⑦ Cable type
　　S :standard cable
　　R :robot cable
　　W :waterproof cable


⑧ Cable length
　　□ :□m (max. 10m)
　　　(*) In case of using extension cable
　　　　Voltage output : sensor cable (m) + extension cable (m) ≦ 10m
　　　　Current output : sensor cable (m) + extension cable (m) ≦ 100m
　　 ・Please consider extension cable on page 120〜122.


⑨ Position output
　　AD :0〜10V (When magnet moves toward tip, output increase.)
　　AR :10〜0V (When magnet moves toward tip, output decrease.)
　　BD :4〜20mA (When magnet moves toward tip, output increase.)
　　BR :20〜4mA (When magnet moves toward tip, output decrease.)

Dimensions

Probe Cable  
Zoom Zoom
  • Catalogue
  • Manuals
Pagetop

Contact Form

Pagetop