#Profibus_DP


;====================================================================================
;==== Prm-Text-Def-List =============================================================
;====================================================================================

;=====================================================================================
;==== Ext-User-Prm-Data-Def-List =====================================================
;=====================================================================================


;=====================================================================================
;==== General DP Keywords ============================================================
;=====================================================================================

GSD_Revision=1
Vendor_Name = "SANTEST"
Model_Name = "GYSE-P"
Revision = "1.10"
Ident_Number = 0x0CD2
Protocol_Ident = 0
Station_Type = 0
FMS_supp = 0
Hardware_Release = "V1.00"
Software_Release = "V1.10"
Redundancy = 0
Repeater_Ctrl_Sig = 0
24V_Pins = 0


;==============================================================================
;==== Supported baudrates =====================================================
;==============================================================================

9.6_supp = 1
19.2_supp = 1
45.45_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1

MaxTsdr_9.6=50
MaxTsdr_19.2=50
MaxTsdr_45.45=50
MaxTsdr_93.75=50
MaxTsdr_187.5=50
MaxTsdr_500=50
MaxTsdr_1.5M=150
MaxTsdr_3M=300
MaxTsdr_6M=600
MaxTsdr_12M=1200


;==============================================================================
;==== Slave specific values ===================================================
;==============================================================================

Slave_Family = 0
Implementation_Type = "VPC3+"
Bitmap_Device = "GYSE-P"

Freeze_Mode_supp=1
Sync_Mode_supp=1
Fail_Safe=1
Auto_Baud_supp=1
Set_Slave_Add_supp=1

Min_Slave_Intervall=10

Modular_Station=1
Max_Module=1
Modul_Offset = 0
Max_Input_Len=128
Max_Output_Len=4
Max_Data_Len=132

Max_Diag_Data_Len=112



;==============================================================================
;==== User-Prm-Data ===========================================================
;==============================================================================
;User_Prm_Data_Len = 7	
;User_Prm_Data = 0x00,0x00,0x00,0x00,0x05,0xC1,0x00
Max_User_Prm_Data_Len = 7
Ext_User_Prm_Data_Const(0)= 0x00,0x00,0x00


;
PrmText= 1
Text(0)= "zero value"
Text(1)= "old value"
EndPrmText
;
PrmText= 2
Text(0)= "Normal"
Text(1)= "Reverse"
EndPrmText
;
PrmText= 3
Text(0)= " STATUS/ L / M / H "
Text(1)= " STATUS/ H / M / L "
Text(2)= " L / M / H / HH "
Text(3)= " HH / H / L / LL   "
EndPrmText
;
;PrmText= 4
;Text(0) = "allocated buffer size"
;EndPrmText

ExtUserPrmData= 1 "Error handling"
Bit(0) 0 0-1
Prm_Text_Ref= 1
EndExtUserPrmData
;
ExtUserPrmData= 2 "Measure direction"
Bit(2) 0 0-1
Prm_Text_Ref= 2
EndExtUserPrmData

;
ExtUserPrmData= 3 "Data format"
BitArea(6-7) 0 0-3
Prm_Text_Ref= 3
EndExtUserPrmData
;
ExtUserPrmData= 4 "Resolution(um)"
Unsigned16 5 1-1000
EndExtUserPrmData
;

; UserPrmData: Length and Preset:
Ext_User_Prm_Data_Ref(3)=4
Ext_User_Prm_Data_Ref(5)=1
Ext_User_Prm_Data_Ref(5)=2
Ext_User_Prm_Data_Ref(5)=3


;==============================================================================
;==== Module-Definition-List ==================================================
;==============================================================================
;0x93:4byte in, 0xA0:1byte out

Module= "1 magnet position" 0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x00
EndModule


Module= "1 magnet position and velocity" 0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x20
EndModule
;

Module= "2 magnets position" 0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x01
EndModule
;

Module= "2 magnets position and velocity" 0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x21
EndModule
;


Module= "3 magnets position" 0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x02
EndModule
;

Module= "3 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x22
EndModule
;

Module= "4 magnets position" 0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x03
EndModule
;

Module= "4 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x23
EndModule
;

Module= "5 magnets position" 0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x04
EndModule
;

Module= "5 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x24
EndModule
;

Module= "6 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x05
EndModule
;

Module= "6 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x25
EndModule
;

Module= "7 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x06
EndModule
;

Module= "7 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x26
EndModule
;

Module= "8 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x07
EndModule
;

Module= "8 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x27
EndModule
;

Module= "9 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x08
EndModule
;

Module= "9 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x28
EndModule
;

Module= "10 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x09
EndModule
;

Module= "10 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x29
EndModule
;

Module= "11 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x0A
EndModule
;
Module= "11 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x2A
EndModule
;

Module= "12 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x0B
EndModule
;
Module= "12 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x2B
EndModule
;

Module= "13 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x0C
EndModule
;
Module= "13 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x2C
EndModule
;

Module= "14 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x0D
EndModule
;
Module= "14 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x2D
EndModule
;

Module= "15 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x0E
EndModule
;
Module= "15 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x2E
EndModule
;

Module= "16 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x0F
EndModule
;
Module= "16 magnets position and velocity" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x2F
EndModule
;

Module= "17 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x10
EndModule
;
Module= "18 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x11
EndModule
;
Module= "19 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x12
EndModule
;
Module= "20 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x13
EndModule
;
Module= "21 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x14
EndModule
;
Module= "22 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x15
EndModule
;
Module= "23 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x16
EndModule
;
Module= "24 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x17
EndModule
;
Module= "25 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x18
EndModule
;
Module= "26 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x19
EndModule
;
Module= "27 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x1A
EndModule
;
Module= "28 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x1B
EndModule
;
Module= "29 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x1C
EndModule
;
Module= "30 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x1D
EndModule
;
Module= "31 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x1E
EndModule
;
Module= "32 magnets position" 0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93,0x93
Ext_Module_Prm_Data_Len =  1
Ext_User_Prm_Data_Const(0) = 0x1F
EndModule
;