- Model GY Series
- All-in-one Series
- GYSE-P Probe
- GYSE-A Probe
- GYSE-S Probe
- GYSE-Q Probe
- GYLS / GYLT Probe
- GYLS-T / GYLT-T Probe
- GYcAT Probe
- GYAF1 Probe
- Compact Series
- GYMS Probe / GYMSC Controller
- GYGS Probe / GYGSC Controller
- GYPM Probe / GYPMC Controller
- GYPE2K Probe / GYMSC Controller
- GYMT Probe / GYMTC Controller
- High Performance Series
- GYcRS Probe
- GYcRP Probe
- GYMR5 Probe
- GYFRS Probe
- GYHR Probe / GYMNC Controller
- Linear Profile Series
- GYKM Probe / GYMNC Controller
- GYKM-LS / GYKM-LT Probe
- GYKS Probe
- Flexible rod Series
- GYSE-FX-A
- GYSE-FX-S
- GYSE-FX-Q
- Controller
- GYHC Controller
- GYFC2 Controller
- GYDC-05 Controller
- GYCL-201
- Display
- GKS Controller with Display
- DP-50-D
- DP-101-D
- Option
- High Ambient Temperature version
- Waterproof Probe（IP-68）
- SRT option
- Probe with flange or ferrule
- Dead-zone length / Material / Accessories
- Magnet/Float
- Float
- Magnet
- Model GMR Series
- Model CS Series
- Model SMR Series
- Model I-SAC Series
- IMPAK Series
Model GY Series
High Ambient Temperature version
This is high ambient temperature probe (rod parts only) of Heavy Duty
version.
Employing selected materials and electronics, this option works in ambient
temperature upto 200°C (rod parts only). (Please consult us in case of
more than 200°C.)
As the operating temperature of probe head is to be less than 65°C,
cooling sensor head is required at user side or we recommend heat-sink option.
version.
Employing selected materials and electronics, this option works in ambient
temperature upto 200°C (rod parts only). (Please consult us in case of
more than 200°C.)
As the operating temperature of probe head is to be less than 65°C,
cooling sensor head is required at user side or we recommend heat-sink option.
Specifications
| Non-linearity | < ±0.05%FS TYP |
|---|---|
| Resolution | Analogue:0.01%FS (with GYHC) / Digital:0.1mm (with GYDC-05) |
| Repeatability | < ±0.01%FS (GYcRP-***-H0) / < ±0.05%FS (GYcRP-***-H1-H2) |
| Temp drift | ±50ppm FS/°C (GYcRP-***-H0) / ±70ppm FS/°C (GYcRP-***-H1-H2) |
| Admissible press. | 35MPa (probe rod) |
| Operating Temp | probe head :-5°C-+65°C probe rod :-100°C (GYcRP-***-H0) probe rod :-120°C (GYcRP-***-H1) probe rod :-200°C (GYcRP-***-H2) |
| Vibration | 6G(or 40Hz 2mmPP) |
| Shock | 50G(2msec) |
| Protection | IP65 |
| Cable length | 1.5m(Standard)(Option:Max.200m) |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Model No.
(1):Model No. of Probe (Note)
(2):Effective stroke
(3):Thread
(4):Sensor rod diameter
(5):Cable connection
(6)Temp of probe rod
H0:100°C
H1:120°C
H2:200°C
H3:more than 200°C (Special order)
*Please consult us in case of more than 200°C.
(Note) Applied probe type is GYcRP, GYHR and GYcAT.
Dimensions
| Heat-sink type（GYcRP-Probe） | ||||||
|---|---|---|---|---|---|---|
 | ||||||
|
Material probe head:Al diecast / probe rod:SS316 (Note)
(Note) The material of probe rod in case heat-sink type is SS316.
Standard type probe rod is SS304. (Option SS316.)
