- Model GY Series
- All-in-one Series
- GYSE-P Probe
- GYSE-A Probe
- GYSE-S Probe
- GYSE-Q Probe
- GYLS / GYLT Probe
- GYLS-T / GYLT-T Probe
- GYcAT Probe
- GYAF1 Probe
- Compact Series
- GYMS Probe / GYMSC Controller
- GYGS Probe / GYGSC Controller
- GYPM Probe / GYPMC Controller
- GYPE2K Probe / GYMSC Controller
- GYMT Probe / GYMTC Controller
- High Performance Series
- GYcRS Probe
- GYcRP Probe
- GYMR5 Probe
- GYFRS Probe
- GYHR Probe / GYMNC Controller
- Linear Profile Series
- GYKM Probe / GYMNC Controller
- GYKM-LS / GYKM-LT Probe
- GYKS Probe
- Flexible rod Series
- GYSE-FX-A
- GYSE-FX-S
- GYSE-FX-Q
- Controller
- GYHC Controller
- GYFC2 Controller
- GYDC-05 Controller
- GYCL-201
- Display
- GKS Controller with Display
- DP-50-D
- DP-101-D
- Option
- High Ambient Temperature version
- Waterproof Probe（IP-68）
- SRT option
- Probe with flange or ferrule
- Dead-zone length / Material / Accessories
- Magnet/Float
- Float
- Magnet
- Model GMR Series
- Model CS Series
- Model SMR Series
- Model I-SAC Series
- IMPAK Series
Model GY Series
GYSE-FX-S
Flexible Rod Type / SSI / The maximum effective stroke is 4000mm
The GYSE-FX series are new models using not a conventinal
stainless steel but a polyolefin resin as the rod material.
Since it is of a structure with flexibility in the rod part, the position
tracking in curve is feasible.(Minimum bend radius 200mm)
GYSE series element is used and high accuracy detection is possible.
The maximum effective stroke is 4000mm.
stainless steel but a polyolefin resin as the rod material.
Since it is of a structure with flexibility in the rod part, the position
tracking in curve is feasible.(Minimum bend radius 200mm)
GYSE series element is used and high accuracy detection is possible.
The maximum effective stroke is 4000mm.
Specifications
| Non-linearity | < ±0.025%FS (Min.±50μm) |
|---|---|
| Resolution | 0.01mm(standard), 0.1mm, 0.05mm, 0.005mm, 0.002mm, 0.001mm |
| Repeatability | ±0.001%FS (Min.±3μm) |
| Temp drift | ±15ppmFS/°C |
| Output | SSI |
| Position output (Standard) | SSI, 24bit Binary(standard) or Gray code |
| Velocity output (Option) | no-option |
| Alarm output | Open drain 50V 0.1A (Alarm signal for lost magnet) |
| Power supply | +24(±2)VDC (80mA) |
| Frequency response | Std 1kHz (depending on stroke) sampling |
| Operating Temp | 0°C-+65°C |
| Stroge Temp | -20°C-+65°C |
| Vibration | 3G(or 40Hz 1mmpp) |
| Shock | 10G(2msec) |
| Protection | IP65 |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Dimensions
| Straight connector type (Standard) | Pigtail type (Option) | L shape connector type (Option) | ||||
|---|---|---|---|---|---|---|
 |  |  | ||||
|
| |
Material probe head:Al diecast, pobe rod:polyolefin resin
Standard magnet:No.2Y
Connector:LEMO connector (Material:brass with Ni plating)
(Standard:straight type, (Option:L type)
