- Model GY Series
- All-in-one Series
- GYSE-P Probe
- GYSE-A Probe
- GYSE-S Probe
- GYSE-Q Probe
- GYLS / GYLT Probe
- GYLS-T / GYLT-T Probe
- GYcAT Probe
- GYAF1 Probe
- Compact Series
- GYMS Probe / GYMSC Controller
- GYGS Probe / GYGSC Controller
- GYPM Probe / GYPMC Controller
- GYPE2K Probe / GYMSC Controller
- GYMT Probe / GYMTC Controller
- High Performance Series
- GYcRS Probe
- GYcRP Probe
- GYMR5 Probe
- GYFRS Probe
- GYHR Probe / GYMNC Controller
- Linear Profile Series
- GYKM Probe / GYMNC Controller
- GYKM-LS / GYKM-LT Probe
- GYKS Probe
- Flexible rod Series
- GYSE-FX-A
- GYSE-FX-S
- GYSE-FX-Q
- Controller
- GYHC Controller
- GYFC2 Controller
- GYDC-05 Controller
- GYCL-201
- Display
- GKS Controller with Display
- DP-50-D
- DP-101-D
- Option
- High Ambient Temperature version
- Waterproof Probe（IP-68）
- SRT option
- Probe with flange or ferrule
- Dead-zone length / Material / Accessories
- Magnet/Float
- Float
- Magnet
- Model GMR Series
- Model CS Series
- Model SMR Series
- Model I-SAC Series
- IMPAK Series
Model GY Series
GYMR5 Probe
Compact Head Version
GYMR5 probe has compact sensor head compared with GYcRS
probe, yet realizing the same technical specifications and
completely compatible. Radial cable-out renders mechanical
compactness, especially when mounted inside cylinders. GYMR5
probe is used in combination with GYFC2 or GYHC controller,
which provides analogue output and GYDC-05 controller, which
provides digital output.
probe, yet realizing the same technical specifications and
completely compatible. Radial cable-out renders mechanical
compactness, especially when mounted inside cylinders. GYMR5
probe is used in combination with GYFC2 or GYHC controller,
which provides analogue output and GYDC-05 controller, which
provides digital output.
Specifications
| Non-linearity | < ±0.025%FS TYP |
|---|---|
| Resolution | analogue:16bit (with GYHC) / digital:Min.1μm (with GYDC-05) |
| Repeatability | < ±0.01%FS TYP |
| Temp drift | 20ppm FS/°C |
| Admissible press. | 35MPa (probe rod) |
| Operating Temp | -20°C-+80°C |
| Storage Temp | -40°C-+80°C |
| Vibration | 6G (or 40Hz 2mmPP) |
| Shock | 100G (2msec) |
| Protection | IP64 |
| Cable length | 0.5m (Standard) (Option Max.200m) |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Resolution depends on the controller combined.
Model No.
(1):Effective stroke
15mm-2000mm
(2):Thread
K8:M16xP1.5, rodΦ8 (Standard)
M:M24xP1.0, rodΦ10
N:M18xP1.5, rodΦ10
(3):Cable length (m)
Standard:0.5m (Max.200m)
*In case user select a sensor with an effective stroke of
1000mm or more, we recommend the sensor of rodΦ10.
Combined controller
Analogue output type:GYHC, GYFC2
Digital output type:GYDC-05
With LED Display:GKS-01
Dimensions
 | ||||||
|
Material probe head:SS304, probe rod:SS304
Standard magnet;No.2PN
Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
