- Model GY Series
- All-in-one Series
- GYSE-P Probe
- GYSE-A Probe
- GYSE-S Probe
- GYSE-Q Probe
- GYLS / GYLT Probe
- GYLS-T / GYLT-T Probe
- GYcAT Probe
- GYAF1 Probe
- Compact Series
- GYMS Probe / GYMSC Controller
- GYGS Probe / GYGSC Controller
- GYPM Probe / GYPMC Controller
- GYPE2K Probe / GYMSC Controller
- GYMT Probe / GYMTC Controller
- High Performance Series
- GYcRS Probe
- GYcRP Probe
- GYMR5 Probe
- GYFRS Probe
- GYHR Probe / GYMNC Controller
- Linear Profile Series
- GYKM Probe / GYMNC Controller
- GYKM-LS / GYKM-LT Probe
- GYKS Probe
- Flexible rod Series
- GYSE-FX-A
- GYSE-FX-S
- GYSE-FX-Q
- Controller
- GYHC Controller
- GYFC2 Controller
- GYDC-05 Controller
- GYCL-201
- Display
- GKS Controller with Display
- DP-50-D
- DP-101-D
- Option
- High Ambient Temperature version
- Waterproof Probe（IP-68）
- SRT option
- Probe with flange or ferrule
- Dead-zone length / Material / Accessories
- Magnet/Float
- Float
- Magnet
- Model GMR Series
- Model CS Series
- Model SMR Series
- Model I-SAC Series
- IMPAK Series
Model GY Series
up to 100°C, including sensor head.
Electronic parts inside are minimized, yet our device of circuit
produces high performance and reliability in the application.
Cable used has reinforced silicon rubber sheath which stands
ambient temperatures up to 150°C. Max cable extension is 100m.
GYHR probe can also be used in combination with GYHC and
GYDC-05 controller, which provides velocity output or digital
output.
Specifications
| Non-linearity | < ±0.1%FS TYP |
|---|---|
| Resolution | < 0.01%FS |
| Repeatability | < ±0.05%FS |
| Temp drift | 22μm/°C＋50ppmFS/°C (probe) / ±50ppmFS/°C (controller) |
| Voltage output | 0-10V or 10-0V / (output current:Max.5mA, load:Min.2kΩ) |
| Current output | 4-20mA or 20-4mA / (load:Min.500Ω) |
| Power supply | +24 (±2) VDC (100mA) |
| Frequency response | Std 1kHz (depending on stroke) sampling |
| Admissible press. | 35MPa (probe rod) |
| Operating Temp | -5°C-+100°C(probe) / 0°C-+60°C(controller) |
| Storage Temp | -40°C-+120°C(probe) |
| Vibration | 6G (or 40Hz 2mmPP) |
| Shock | 50G (2msec) |
| Protection | IP64 (probe) |
| Cable length | 1.5m (Standard) (Option Max.100m) |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Zero/Gain adjustments by trimmer of controller is possible, std within ±3%FS.
Model No.
(1):Effective stroke
15mm-2000mm
(2):Sensor rod
diameter
8:Φ8 (Standard)
blank:Φ10
(3):Cable length (m)
Standard:1.5m
*In case of an effective stroke of 1000mm or more,
it needs screw side dead zone length of 120mm and
tip dead zone length of 120mm.
(1):Output
A:0-10V
B:4-20mA
C:others (bipolar)
(2):Efective stroke
15mm-2000mm
(3):Direction of output
(toward probe tip)
D:output increase
R:output decrease
Dimensions
| Probe | Controller | |||||
|---|---|---|---|---|---|---|
 |  | |||||
|
|
Material probe head:SS304, probe rod:SS304
Standard magnet:T14-M2. Other magnets are available from Magnet Grouping [B].
The tip dead zone length (100mm) depends on the magnet or float type.
