- Model GY Series
- All-in-one Series
- GYSE-P Probe
- GYSE-A Probe
- GYSE-S Probe
- GYSE-Q Probe
- GYLS / GYLT Probe
- GYLS-T / GYLT-T Probe
- GYcAT Probe
- GYAF1 Probe
- Compact Series
- GYMS Probe / GYMSC Controller
- GYGS Probe / GYGSC Controller
- GYPM Probe / GYPMC Controller
- GYPE2K Probe / GYMSC Controller
- GYMT Probe / GYMTC Controller
- High Performance Series
- GYcRS Probe
- GYcRP Probe
- GYMR5 Probe
- GYFRS Probe
- GYHR Probe / GYMNC Controller
- Linear Profile Series
- GYKM Probe / GYMNC Controller
- GYKM-LS / GYKM-LT Probe
- GYKS Probe
- Flexible rod Series
- GYSE-FX-A
- GYSE-FX-S
- GYSE-FX-Q
- Controller
- GYHC Controller
- GYFC2 Controller
- GYDC-05 Controller
- GYCL-201
- Display
- GKS Controller with Display
- DP-50-D
- DP-101-D
- Option
- High Ambient Temperature version
- Waterproof Probe（IP-68）
- SRT option
- Probe with flange or ferrule
- Dead-zone length / Material / Accessories
- Magnet/Float
- Float
- Magnet
- Model GMR Series
- Model CS Series
- Model SMR Series
- Model I-SAC Series
- IMPAK Series
Model GY Series
(20mm thick) adopting new method of detecting magnetostrictive
phenomena. Applying to hydraulic cylinder, its total length becomes
space saving. GYGS probe is used in combination with the GYGSC
controller, which provides analogue output, 0-10V or 4-20mA, and
can also be used in combination with GYHC or GYDC-05 controller,
which provides velocity output or digital output.
Specifications
| Non-linearity | < ±0.025%FS TYP |
|---|---|
| Resolution | < 0.01%FS |
| Repeatability | < ±0.01%FS |
| Temp drift | ±40ppmFS/°C (probe) / ±50ppmFS/°C (controller) |
| Voltage output | 0-10V or 10-0V / (output current:Max.5mA, load:Min.2kΩ) |
| Current output | 4-20mA or 20-4mA / (load:Min.500Ω) |
| Power supply | +24 (±2) VDC (100mA) |
| Frequency response | Std 1kHz(depending on stroke) sampling |
| Admissible press. | 35MPa(probe rod) |
| Operating Temp | -20°C-+80°C (probe) / 0°C-+60°C (controller) |
| Storage Temp | -40°C-+80°C |
| Vibration | 6G (or 40Hz 2mmPP) |
| Shock | 50G (2msec) |
| Protection | IP67 (probe) |
| Cable length | 1.5m (Standard) (Option Max.50m) |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Zero/Gain adjustments by trimmer of controller is possible, std within ±3%FS.
Model No.
(1):Effective stroke
15mm-3000mm
(2):Thread
N8:M18xP1.5, rod Φ8
(Standard)
N:M18xP1.5, rod Φ10
(thread length = 22mm)
(3):Cable length (m)
Standard:1.5m
(4):Cable out direction
L:radial out (Standard)
S:axial out (Option)
(1):Output
A:0-10V
B:4-20mA
C:others (bipolar)
(2):Effective stroke
15mm-3000mm
(3):Direction of output
(toward probe tip)
D:output increase
R:output decrease
Dimensions
| Cable radial out type (Standard) | Controller | Cable axial out type (Option) | ||||
|---|---|---|---|---|---|---|
 |  |  | ||||
|
| |
Material probe head:SS304.Bs, probe rod:SS304, cable gland:Bs
Standard magnet:No.2PN. Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Cable direction of radial output type is adjustable.
