- Model GY Series
- All-in-one Series
- GYSE-P Probe
- GYSE-A Probe
- GYSE-S Probe
- GYSE-Q Probe
- GYLS / GYLT Probe
- GYLS-T / GYLT-T Probe
- GYcAT Probe
- GYAF1 Probe
- Compact Series
- GYMS Probe / GYMSC Controller
- GYGS Probe / GYGSC Controller
- GYPM Probe / GYPMC Controller
- GYPE2K Probe / GYMSC Controller
- GYMT Probe / GYMTC Controller
- High Performance Series
- GYcRS Probe
- GYcRP Probe
- GYMR5 Probe
- GYFRS Probe
- GYHR Probe / GYMNC Controller
- Linear Profile Series
- GYKM Probe / GYMNC Controller
- GYKM-LS / GYKM-LT Probe
- GYKS Probe
- Flexible rod Series
- GYSE-FX-A
- GYSE-FX-S
- GYSE-FX-Q
- Controller
- GYHC Controller
- GYFC2 Controller
- GYDC-05 Controller
- GYCL-201
- Display
- GKS Controller with Display
- DP-50-D
- DP-101-D
- Option
- High Ambient Temperature version
- Waterproof Probe（IP-68）
- SRT option
- Probe with flange or ferrule
- Dead-zone length / Material / Accessories
- Magnet/Float
- Float
- Magnet
- Model GMR Series
- Model CS Series
- Model SMR Series
- Model I-SAC Series
- IMPAK Series
Model GY Series
impact-proof performance. Vibration-proof 10G and impact-proof
200G (2msec) have been achieved. The output signal is compatible
with the GYcRS probe, and it is available by combining with
GYDC-05 in the digital output and with GYHC, GYFC2 in the analog
output for the controller. Moreover, it is possible to combine with
digital output (GKS-01) with indicator. The flat head permits a
miniaturized application and the flange makes the installation easier,
compared with a conventional screw type.
Specifications
| Non-linearity | < ±0.025%FS TYP |
|---|---|
| Resolution | analogue:16bit (with GYHC) / digital:Min.1μm (with GYDC-05) |
| Repeatability | < ±0.01%FS TYP |
| Temp drift | 20ppm FS/°C |
| Admissible press. | 35MPa (probe rod) |
| Operating Temp | -20°C-+80°C |
| Storage Temp | -40°C-+80°C |
| Vibration | 10G (or 50Hz 2mmPP) |
| Shock | 200G (2msec) |
| Protection | IP67 (Option IP68) |
| Cable length | 1.5m (Standard) (Option Max.200m) |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Resolution depends on the controller combined.
Model No.
(1):Effective stroke
15mm-3500mm
(2):Cable connection
CN:Connector type IP67
(Standard)
G*:Pigtail type IP67
WPCN:Connector type IP68
WPG*:Pigtail type IP68
(*:Cable length [m], Standard:1.5m)
Combined controller
Analogue output type:GYHC, GYFC2
Digital output type:GYDC-05
With LED Display:GKS-01
Dimensions
| Connector type (Code:CN) | Pigtail type (Code:G*) | |||||
|---|---|---|---|---|---|---|
 |  | |||||
|
|
Material probe head:SS304、probe rod:SS304
Standard magnet:No.2PN. Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
CN type:Sanwa SNW-1607-PCF (Material:zinc alloy fluoroplastic), WPCN type:Tajimi TC1108-12A10-7F (8.6) (Material:brass with Ni plating)
The figure in < > is the figure of IP68 type (WPCN, WPG*).
Applicable O ring type is P-14. Back-up ring is strongly suggested in usage.
