- Model GY Series
- All-in-one Series
- GYSE-P Probe
- GYSE-A Probe
- GYSE-S Probe
- GYSE-Q Probe
- GYLS / GYLT Probe
- GYLS-T / GYLT-T Probe
- GYcAT Probe
- GYAF1 Probe
- Compact Series
- GYMS Probe / GYMSC Controller
- GYGS Probe / GYGSC Controller
- GYPM Probe / GYPMC Controller
- GYPE2K Probe / GYMSC Controller
- GYMT Probe / GYMTC Controller
- High Performance Series
- GYcRS Probe
- GYcRP Probe
- GYMR5 Probe
- GYFRS Probe
- GYHR Probe / GYMNC Controller
- Linear Profile Series
- GYKM Probe / GYMNC Controller
- GYKM-LS / GYKM-LT Probe
- GYKS Probe
- Flexible rod Series
- GYSE-FX-A
- GYSE-FX-S
- GYSE-FX-Q
- Controller
- GYHC Controller
- GYFC2 Controller
- GYDC-05 Controller
- GYCL-201
- Display
- GKS Controller with Display
- DP-50-D
- DP-101-D
- Option
- High Ambient Temperature version
- Waterproof Probe（IP-68）
- SRT option
- Probe with flange or ferrule
- Dead-zone length / Material / Accessories
- Magnet/Float
- Float
- Magnet
- Model GMR Series
- Model CS Series
- Model SMR Series
- Model I-SAC Series
- IMPAK Series
Model GY Series
GYcRP, GYcRS, GYMR5 and GYFRS probes can be associated with
this controller.
Monitoring cable-disconnect and magnet-drop are standard
features of GYFC2. Velocity output is optional.
Specifications
| Resolution (position output) | 0.005%FS (Probe:GYcRS, GYMR5, GYFRS) / 0.01%FS (Probe:GYcRP) |
|---|---|
| Temp drift | ±20ppmFS/°C |
| Position Output (OUT1) | 0-10V (output current:Max.5mA, load:Min.2kΩ) |
| Position Output (OUT2) | 4-20mA (load:Min.500Ω) or inverted output etc |
| Velocity output (OUT2) (Option) | ±10V(Resolution:1%FS) |
| Alarm output | Contact 1A 30VDC (Cable disconnection and magnet drop) |
| Power supply | +24VDC±5% ( < 350mA) (Note1) |
| Frequency resp. | Std 1kHz(depending on stroke) Sampling |
| Operating Temp | 0°C-+60°C |
| Storage Temp | -20°C-+85°C |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Zero/full sacle adjust in ±3%FS can be possible by trimmer equipped.
(Note1) Optionally, user can select the following power supply.
±15VDC type:+15V (±5%) < 200mA, -15V(±5%) < 100mA
+12VDC type:+12V (±5%) < 700
Model No.
(1):Probe
RS:GYcRS probe
RP:GYcRP probe
R5:GYMR5 probe
FS:GYFRS probe
(2):Effective stroke (mm)
(3):Dead zone length of
probe head side (mm)
(4):Analogue position output
| Output1 (OUT1) | Output2 (OUT2) | |
|---|---|---|
| A | 0-10V | 0-10V |
| BD | 0-10V | 4-20mA |
| BR | 0-10V | 20-4mA |
| CB□□ (bipolar output) [ex] CB10 CB5 | -□□V-+□□V -10V-+10V -5V-+5V | +□□V--□□V +10V--10V +5V--5V |
| VD Z/F [ex] VD1/5 VD0.5/9.5 | customer's request 1V-5V 0.5V-9.5V | - |
| VR Z/F [ex] VR5/1 VR9.5/0.5 | - | custom order 5V-1V 9.5V-0.5V |
| I Z/F [例] I5.12/19.34 I20/5.38 | - | custom order 5.12mA-19.34mA 20.00mA-5.38mA |
*F＝full scale point
(5):Power supply
24S:+24VDC (Standard)
15W:±15VDC (Option)
12S:+12VDC (Option)
(6):Magnet and Float
| Magnet | Float |
|---|---|
| M0:No.Φ magnet M0SM:No.ΦSPM magnet M0LM:No.ΦLPM magnet M2P:No.2P magnet M2PN:No.2PN magnet M3:No.3 magnet M11:No.11 magnet M11N:No.11N magnet T142:No.T14-M2 magnet T144:No.T14-M4 magnet T162:No.T16-M2 magnet T163:No.T16-M3 magnet MG□:other magnet | F28S:Φ28SS316 loat F30S:Φ30SS316 loat F40S:Φ40SS316 (B) loat F42S:Φ42.5SS316 loat F50S:Φ50SS316 loat F54S:Φ54SS304 loat F25N:RF-A10 plastic float F28N:RF-A6 plastic float FL□:other float |
(7):Option (blank:No option)
Velocity output (Note2)
V[ ] ([ ]:Max speed (mm/sec))
(Note2)
You can specify max speed within 3%-300%/sec of effective stroke(mm).
(ex:effective stroke=300mm, 9mm/sec-900mm/sec)
Dimensions
 | ||||||
|
