SANTEST CO.,LTD.

List with applicationsList with models

Model GY Series

GYAF1 Probe
Flat head, analogue output
GYAF1 Probe

The GYAF1 probe is an all-in-one type sensor with integrated controller. After supplying DC24V to the probe,an analogue voltage and/or current, which are proportional to the position of the magnet, can be obtained.
Reversed output or bipolar output can be supported as well. The flat head permits a miniaturized application, and the flange makes the installation easier, compared with the conventional screw type probes.

Specifications

Non-linearity≦±0.025%FS TYP
Resolution≦0.01%FS
Repeatability≦±0.01%FS
Temp. drift≦±40ppmFS/°C
Voltage output0-10V or 10-0V
(output current:Max.5mA, load:Min.2kΩ)
Current output4-20m or 20-4mA
(load:Max.500Ω)
Alarm outputnot available
Power supply+24(±2)VDC (100mA)
Sampling freq.Std 1kHz(up to stroke 1000mm)
Max. Pressure35MPa(probe rod)
Operating temp.-20°C-+80°C
Storage temp.-40°C-+80°C
Vibration6G(or 40Hz 2mmPP)
Shock50G(2msec)
IP gradeIP67(option:IP68)

・The above mentioned accuracy applies to sensors with an
effective stroke of 300 mm or more.

Model No.

①Effective stroke
  15-3000mm

②Thread dead zone
  S:50mm(STD)
  □:□mm(option)(specified by customers)

③Tip dead zone
  S:70mm/90mm/100mm(STD)
  ・S (STD length) depends on the selected magnet or float in ⑤.

tip DZmagnetfloat
70mmM2PN, M0SM, M0LM, M3, M11NF25N, F28N
90mmF28S, F30S
100mmT144, T163F40S, F42S, F50S

□:□mm(option)(specified by customers)

④Thread/Rod diameter
  F :flange, rod Φ10(STD)

⑤Associated magnet or float

magnetfloat
M2PN :No.2PN (STD)
M0SM :No.ΦSPM
M0LM :No.ΦLPM
M3 :No.3

M11N :No.11N
T144 :No.T14-M4
T163 :No.T16-M3
MG□ :other magnet
F28S :Φ28 SS316
F30S :Φ30 SS316L
F40S :Φ40 SS316(B)
F42S :Φ42.5 SS316
F50S :Φ50 SS316
F54S :Φ54 SS304
F25N :RF-A10 plastic
F28N :RF-A6 plastic
FL□ :other float

⑥Cable connection
  CN:connector(STD)
  △G□F:pigtail / cable end : free
  △G□A:pigtail / cable end : with connector for relay
      (□:cable length(m))
      (△:cable type
  S:standard, H:high temp. cable, R:robot cable)
  <Water proof option>
  WPCN:submersible connector type
  WPG□F:pigtail / cable end : free
  WPG□A:pigtail / cable end : with connector for relay
      (□:cable length(m))

⑦Position output
  AD:0-10V(When magnet moves toward tip, output increase)
  AR:10-0V(When magnet moves toward tip, output decrease)
  BD:4-20mA(When magnet moves toward tip, output increase)
  BR:20-4mA(When magnet moves toward tip, output decrease)
  CD□□:bipolar output(-□V-+□V)
      (for example CD10:-10V-+10V)
  CR□□:bipolar output(+□V--□V)
      (for example CR05:+5V--5V)

Dimensions

Connector type(Code:CN) Pigtail type(Code:G※)  
Zoom Zoom
  • Catalogue
Pagetop

Contact Form

Pagetop