Model GY Series
Float
| Model | Dimensions | Specifications | Dead Zone(mm) |
|---|
φ28
SUS316 | | Material | SUS316 | |
|---|
| Specific gravity | 0.75 |
| Burst | 1MPa |
| Install direction | die stamp |
φ50
SUS316 | | Material | SUS316 | |
|---|
| Specific gravity |
0.53 |
| Burst | 1MPa |
| Install direction | circle mark |
φ42.5
SUS316 | | Material | SUS316 | |
|---|
| Specific gravity |
0.55 |
| Burst | 4MPa |
| Install direction | arrow mark |
φ30
SUS316L | | Material |
SUS316L | |
|---|
| Specific gravity |
0.66 |
| Burst |
2MPa |
| Install direction | diamond mark |
φ40
SUS316 | | Material |
SUS316 | |
|---|
| Specific gravity |
0.52 |
| Burst |
1.4MPa |
| Install direction | diamond mark |
Float
stopper | | Material |
SUS316 | Float stoppers dimensions
| | Φ8 | Φ10 | Φ13.8 |
|---|
| A | 14.5 | 14.5 | 20 |
|---|
| B | 6 | 7 | 9 |
|---|
| C | 19 | 19 | 25 |
|---|
| D | Φ8.2 | Φ10.2 | Φ14 |
|---|
| E | 8 | 8 | 8 |
|---|
| F | 19 | 19 | 25 |
|---|
|
|---|
| Specific gravity |
- |
| Burst |
- |
| Install direction | - |
-Cautions for installing a float
All floats have installing directions, correct direction is required.
Please refer to instruction manual attached to the products
-Other than above-mentioned floats, custom order is available.
-In case corrosive or high pressure application, custom order of float material such as Titanium, PVC, Teflon etc available
-Actual liquid level is to be detected depending on fluid and float gravity.
