Model GY Series
Absolute Transducer
Model GY Series are "Displacement Transducers" employing magnetostrictive phenomena, especially the Wiedemann effect. An ultra-sonic wave is generated by a moving magnet operating near a magnetostrictive wave guide on which the sonic wave propagates up to the head of the transducer. The propagation time is precisely measured by state of the art technology and then the absolute displacement transducer is operational.
Direct analog output transducer
GYcAT High performance transducer
Non-linearity ±0.05%FS TYP.
Output signal 0 to 10V / 4 to 20mA
Alarm signal Open collector
Power supply 24V±2V 0.1A
Operating temperature -20C to 65C
more... >
GYLT/LS Low cost transducer
Non-linearity ±0.025%FS TYP.
Output signal(GYLT) or 0-10V(GYLS)
Alarm signal None
4 -20mA
Power supply 24V±2V 0.05A
Operating temperature -20C to 65C
more... >
Sensor
GYcRS Digital output probe
Non-linearity ±0.025%FS TYP.
Output signal 0-10V(LT) or 4 -20mA(LS)
Alarm signal None
Power supply 24V±2V 0.05A
Operating temperature -20C to 65C
more... >
Controller
GYDC-05 High-end Digital Controller for GY transducer
Digital Output Parallel Binary(Standard)/Incremental(Option)/SSI(Option)
Resolution 0.01mm/bit (GYcRS)
Analog Output 0-10V(Standard)/4-20mA(Option)
Resolution 16bit(1/65536,GYcRS)
Velocity Output ±10V or 4-20mA(Option)
Alarm signal Open collector
Power supply 24V±5% <160mA
Operating temperature C to 65C
more... >
| 
