SANTEST | Product | Magnetostrictive Displacement Transducer

High-end Digital Controller for GY

GYDC-05 controller enables digital output of 1um resolution and also analog output.

Other features(option)

-Additional analog output of magnet velocity.
-SSI output and incremental output are also available.
-Applying DIN rail permits easy mounting

GYDC-05 controller can be used with:
GYcRS/GYMR5/GYFRS/GYGS/GYPM/GYHR
GYcRP/GYMR4 probe.

	Standard version	Option
Digital output (position) with mating connector 10136-3000PE (Sumitomo 3M)	Parallel Binary (Gray code is user-configurable) Negative logic([1]at transistor on)	Incremental output
		SSI output
	Resolution:0.01mm/bit (GYcRS,MR5,FRS probe)	0.1mm,0.05mm,0.002mm & 0.001mm/bit
	Resolution:0.1mm/bit (GYGS,PM,HR,cRP,MR4)	-
Analog output (position) (OUT1)	0~10VDC (Output current Max.5mA Min. load 2kOhm)	4~20mA(Max.500Ohm)
Analog output (position) (OUT1)	Resolution:16bit(1/65536) (GYcRS,MR5,FRS probe) Resolution:0.01%FS (GYGS,PM,HR,cRP,MR4 probe)
Analog output (velocity)*1 (OUT2)	-	±10V or 4~20mA

Power supply	+24VDC±5%(160mA??)
Alarm output	Open collector 0.1A 30VDC (cable disconnection and magnet out of measuring range)
Frequency response	1kHz(stroke <1000mm)
Temperature drift	±10ppmFS/C
Operating temperature	0~+65C
Storage temperature	-20~+75C

¦(The above mentioned accuracy applies to sensors with an effective stroke of 300mm or longer.)
*1:User can obtain not only position output but also velocity output.
±10V:0V at magnet standstill
Positive voltage when magnet moves toward to probe tip.
4~20mA:4mA at magnet standstill
Current increases when magnet moves in both directions.
(Consult factory for other options.)

Digital Output

1:Standard(parallel,negative logic,binary code)
2:Incremental output (250kHz)
5A:SSI asynchronous
5S:SSI synchronous

Resolution

D2:0.1mm
D3:0.05mm
D4:0.01mm(Standard)
D7:0.002mm
D8:0.001mm

Direction

D:Output increase forward probe tip side
R:Output decrease forward probe tip side

Probe

Code	Model	Code	Model
RS	GYcRS	GS	GYGS (Resolution 0.1mm (D2) only)
R5	GYMR5	PM	GYPM(Resolution 0.1mm (D2) only)
FS	GYFRS	HR	GYHR(Resolution 0.1mm (D2) only)
		RP	GYcRP(Resolution 0.1mm (D2) only)
		R4	GYMR4(Resolution 0.1mm (D2) only)

Stroke(mm)

Dead zone on probe head side(mm)

Analog Position Output(OUT1)

Code	Output
AD	0~10V(Standard)
AR	10~0V
BD	4~20mA
BR	20~4mA
CD or CRxx [example] CD10 CD05 CR10	xxV~xxV -10V~+10V -5V~+5V +10V~-10V
VZ/F [example] V1/5 V0.5/9.5	Customer's request (voltage output) 1~5V 0.5V~9.5V
IZ/F [example] I5.12/20 I20/5.38	Customer's request (current output) 5.12~20mA 20~5.38mA

*Z=Zero position F=Full position

Option: Analog Output(OUT2)

-position output (see 7)
-velocity output (1.00~999mm/sec)
VA[ ] ±10V
WB[ ] 4~20mA
[ ]:max velocity (ex. 9R99:max. velocity=9.99mm/sec)
·N:No option

Magnet and Float

Code	Model	Code	Model
M0	No.0	F28S	f28SUS316
M0SM	No.0SPM	F30S	f30SUS316L
M0LM	No.0LPM	F40S	f40SUS316(B)
M2P	No.2P	F42S	f42.5 SUS316
M2PN	No.2PN	F50S	f50 SUS316
M3	No.3	F54S	f54 SUS304
M11	No.11	F25N	RF-A10 float
M11N	No.11N	F28N	RF-A6 float
T142	No.T14-M2	FLx	others
T144	No.T14-M4
T162	No.T16-M2
T163	No.T16-M3
MGx	others


	GYDC-05