SANTEST | Product | Magnetostrictive Displacement Transducer

Magnetostrictive Displacement Transducer

-Low cost,all-in one,direct analog output.
(4-20mA or 0-10V)

-Absolute,non-contacting transducer.

-Improved non-linearity,inproved S/N ratio, reduced power consumption.

-Easy to connection.(Screw type)

-Wide temperature operating range.

-Shock and vibration resistant.

Accuracy	Non-linearity	±0.025%FS TYP.
	Resolution	<0.01%FS
	Repeatability	<±0.01%FS
	Temprature drift	<40ppm FS/C
Output signal	GYLT	4-20mA(max.500Ohm)
Output signal	GYLS	0-10V(max.5mA,min.2kOhm)
Frequency Response		sampling 1kHz standard
Power supply		+24VDC±2V 0.05A
Environment	Admissible pressure	35MPa
	Operating temperature	-20C...+80C
	Storage temperature	-40C...+80C
	Vibration	6G(or 40Hz 2mmpp)
	Shock	50G(2msec)
	Protection Class	IP67(10kPa,30min)
*Specification are applicable over 300mm stroke.

	GYLT/LS probe

	probe head ... Al diecast probe rod ... SS304

*shield to be connected to 0V at user side.